Mina sidor Kontakt
Din varukorg
DPD & FedEx – leveransdatum på produktsidan.
Behöver du hjälp? Fråga DistriNode AI.

Spiralborr KWB 205085 1 st högergående

Spiralborr KWB 205085 1 st högergående
Spiralborr KWB 205085 1 st högergående
Spiralborr KWB 205085 1 st högergående
Spiralborr KWB 205085 1 st högergående
214,04 kr
PDF
PDF
Lager 4 Produktkod 2205685 Modell 205085 Garanti 2 år

Leverans & returer

Beräknad leverans måndag 14 december
Du får löpande uppdateringar via vårt detaljerade spårningssystem
Betalningsalternativ
BetalkortVisaMastercardPayPalApple PayGoogle PayBanköverföring

Produktbeskrivning

The KWB 205085 twist drill bit is a precision-ground, type N drill manufactured to DIN 338 standards for right-hand cutting. It has a 135° tip angle with cross-ground geometry to DIN 1412 C for improved centring and consistent performance. The bit is supplied in natural (self) colour with a cylindrical shank and is intended for industrial-quality drilling in materials such as steel, alloyed steel, cast steel, die castings, sintered steel, non-ferrous metals and hard plastics.

Advantages

This twist drill bit offers self-centring cross-ground tips and a 135° tip angle that reduce walking when starting holes and improve accuracy on a range of materials. Precision grinding to DIN tolerances ensures consistent diameter and cutting geometry. The cylindrical shank provides stable clamping in standard chucks and the single-piece supply allows easy replacement or use as a spare.

Suitable for

Key specifications

How to use

Secure the cylindrical shank in an appropriate drill chuck and ensure the drill is running in right-hand rotation. Select suitable spindle speed and feed for the material being drilled; use cutting fluid or coolant when working with steel or alloyed metals to prolong tool life and improve chip evacuation. Start drilling with light pressure to allow the self-centring tip to locate the hole, then apply steady feed until the hole is completed.

Recommendations

For best results, use recommended cutting speeds for the specific material, maintain correct coolant application for metalworking, and regularly inspect the drill bit for wear. Replace the bit if the tip is rounded or if diameter tolerance is compromised.
Höjdpunkter
  • Drilling holes in steel and alloyed steel
  • Working with cast steel and die castings
  • Drilling sintered steel components
  • Processing non-ferrous metals
  • Drilling hard plastics
  • Standard: DIN 338, cross-ground to DIN 1412 C
  • Cutting direction: Right hand rotation
  • Type: N (general purpose, precision ground)
  • Tip angle: 135°
  • Diameter: 8.5 mm
  • Shank: Cylindrical
  • Finish: Self colour (natural)
  • Quantity: 1 pc
  • Brand / MPN: KWB 205085
  • EAN: 4009312050853

Specifikationer

Specifikationer
Antal borr
1 pc(s)
Avsedd användning
Borr
Borrdiameter
8.5 mm
Borrmaterial
Snabbstål (HSS)
Borrtyp
Spiralborr
Diameter metallborr
8.5
DIN-överensstämmelse
338
Lämplig för material
Icke-järnmetall, stål, rostfritt stål, plåt, profil, järn, gjutjärn
Rotationsriktning
Högergående
Skaftdiameter
8.5 mm
Skaftform
Cylindriskt skaft
Spetsvinkel
135 °
Prishistorik för de senaste 6 månaderna
Spiralborr KWB 205085 1 st högergående
Aktuell
214,04 kr
Lägsta 7 d
209,20 kr
Högsta 7 d
214,04 kr
Ändring 24 h
+1,25 kr   +1%
Ändring 7 d
+4,60 kr   +2%
Ändring 30 d
+15,88 kr   +8%

Skriv en recension

Betyg *
Obs! HTML-kod tolkas inte!

Fler KWB-produkter i den här kategorin

12

Populära produkter i den här kategorin

8
Säljare: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Org.nr 303192950 · Momsreg.nr LT100008198612 · Skickas från EU (Litauen)
WhatsApp
Messenger
Hej, jag är DistriNodes AI-assistent. Jag hjälper dig gärna att hitta produkter, jämföra alternativ, ta fram offerter som PDF eller skapa supportärenden.
Alla kategorier