Skär-/slipskivsset BLAUPUNKT BP-CW-D4115, 3 st

Cutting and grinding disc set BLAUPUNKT BP-CW-D4115 consists of three 115x1.8x22.23 mm diamond discs designed for use with compatible angle grinders. Each disc is rated to a maximum speed of 12,250 rpm and covers segmented, turbo and continuous rim profiles for cutting a wide range of materials. The set is supplied with Blaupunkt quality control and is suitable for both dry and wet cutting depending on the disc type.

Advantages

The three-disc set provides versatile cutting options in a single pack: a segmented diamond disc for aggressive cuts in natural stone and refractories, a turbo diamond disc for fast dry or wet cutting on roof tiles and reinforced materials, and a continuous rim disc for precision cuts in tile, porcelain and ceramics. All discs share the same 115 mm diameter and 22.23 mm bore for straightforward replacement and compatibility with standard angle grinders.

Suitable for

• Cutting natural stone, limestone and granite
• Cutting slabs, bricks and refractory materials
• Dry and wet cutting of roof coverings, slate and fiberglass‑reinforced resin
• Precision cuts in tile, ceramics and porcelain
• DIY projects, workshop repairs and professional maintenance

Key specifications

• Model: BLAUPUNKT BP-CW-D4115
• Contents: 3 pieces (Segmented, Turbo, Continuous diamond rims)
• Dimension: 115 x 1.8 x 22.23 mm (diameter x thickness x bore)
• Maximum speed: 12,250 rpm
• Brand: BLAUPUNKT
• EAN: 5060511253659

How to use

Fit the appropriate disc type to a compatible 115 mm angle grinder following the tool manufacturer’s instructions. Ensure the disc bore (22.23 mm) matches the grinder flange and tighten the disc securely. Use segmented diamond for rough stone and masonry cuts, turbo diamond for faster cuts on roofing and reinforced materials, and continuous rim for smooth cuts in tile and porcelain. Observe the maximum speed rating of 12,250 rpm and select dry or wet cutting according to the disc type and material.

Recommendations

Always wear appropriate personal protective equipment (eye protection, gloves, hearing protection and dust mask). Confirm compatibility with your angle grinder and follow safe operating procedures. For wet cutting, use proper water feed to reduce dust and prolong disc life; for dry cutting, allow periodic cooling breaks to avoid overheating.