Mina sidor Kontakt
Din varukorg
DPD & FedEx – leveransdatum på produktsidan.
Behöver du hjälp? Fråga DistriNode AI.

SFP+ transceivermodul BlueOptics 473471A.101-BO 10000 Mbit/s

SFP+ transceivermodul BlueOptics 473471A.101-BO 10000 Mbit/s
SFP+ transceivermodul BlueOptics 473471A.101-BO 10000 Mbit/s
SFP+ transceivermodul BlueOptics 473471A.101-BO 10000 Mbit/s
SFP+ transceivermodul BlueOptics 473471A.101-BO 10000 Mbit/s
SFP+ transceivermodul BlueOptics 473471A.101-BO 10000 Mbit/s
SFP+ transceivermodul BlueOptics 473471A.101-BO 10000 Mbit/s
SFP+ transceivermodul BlueOptics 473471A.101-BO 10000 Mbit/s
SFP+ transceivermodul BlueOptics 473471A.101-BO 10000 Mbit/s
60 mån.
SFP+ transceivermodul BlueOptics 473471A.101-BO 10000 Mbit/s
SFP+ transceivermodul BlueOptics 473471A.101-BO 10000 Mbit/s
SFP+ transceivermodul BlueOptics 473471A.101-BO 10000 Mbit/s
SFP+ transceivermodul BlueOptics 473471A.101-BO 10000 Mbit/s
SFP+ transceivermodul BlueOptics 473471A.101-BO 10000 Mbit/s
SFP+ transceivermodul BlueOptics 473471A.101-BO 10000 Mbit/s
SFP+ transceivermodul BlueOptics 473471A.101-BO 10000 Mbit/s
SFP+ transceivermodul BlueOptics 473471A.101-BO 10000 Mbit/s
602,90 kr
PDF
PDF
Lager 2045 Produktkod 1465623 Modell 473471A.101-BO Garanti 5 år

Leverans & returer

Beräknad leverans onsdag 9 december
Du får löpande uppdateringar via vårt detaljerade spårningssystem
Betalningsalternativ
BetalkortVisaMastercardPayPalApple PayGoogle PayBanköverföring

Ställ en fråga – AI-assistenten svarar direkt.

Produktbeskrivning

The BlueOptics 473471A.101-BO SFP+ transceiver module is a compact fiber-optic interface designed for 10 Gigabit Ethernet links. Supporting a maximum data transfer rate of 10000 Mbit/s and a maximum optical reach of up to 300 m, this module fits standard SFP+ slots and uses an LC fiber connector. The module has a silver housing, a lightweight design of approximately 20 g, and an MTBF of 1,000,000 hours, providing a reliable physical layer component for network switches, routers and media converters.

Advantages

The transceiver provides a standardized SFP+ form factor for easy hot-plug installation and replacement. Its support for 10 Gigabit Ethernet ensures full-bandwidth connectivity for short-range fiber links, while the LC connector offers broad compatibility with duplex multimode fiber cabling. Low weight and compact dimensions reduce mechanical load on equipment bays, and the specified MTBF indicates long operational life under typical conditions.

Suitable for

  • Short-range 10 Gigabit Ethernet connections within data centers and server rooms
  • Interconnects between switches and media converters over multimode fiber
  • Network equipment upgrades where SFP+ modules are required

Key specifications

  • Data transfer rate: 10000 Mbit/s (10 Gbps)
  • Maximum transfer distance: up to 300 m over appropriate multimode fiber
  • Interface type: 10 Gigabit Ethernet, SFP+ form factor
  • Fiber connector: LC duplex
  • Housing colour: silver
  • Weight: approx. 0.02 kg
  • Reliability: mean time between failures (MTBF) 1,000,000 hours

How to use

Insert the BlueOptics SFP+ module into a compatible SFP+ port on your switch, router or media converter until it locks into place, then connect LC-terminated fiber patch cords to the duplex connector following the correct transmit/receive orientation. Ensure the host device supports 10 Gigabit Ethernet and that link settings (speed, duplex, auto-negotiation) are configured as required. Handle the module with ESD precautions and keep dust caps in place when the module is not connected.

Recommendations

Use the module with compatible multimode fiber and verified LC patch cords rated for 10 Gbps over the intended distance. Verify firmware and transceiver compatibility with the host device vendor guidelines to ensure optimal performance and avoid interoperability issues.

Höjdpunkter
  • Short-range 10 Gigabit Ethernet connections within data centers and server rooms
  • Interconnects between switches and media converters over multimode fiber
  • Network equipment upgrades where SFP+ modules are required
  • Data transfer rate: 10000 Mbit/s (10 Gbps)
  • Maximum transfer distance: up to 300 m over appropriate multimode fiber
  • Interface type: 10 Gigabit Ethernet, SFP+ form factor
  • Fiber connector: LC duplex
  • Housing colour: silver
  • Weight: approx. 0.02 kg
  • Reliability: mean time between failures (MTBF) 1,000,000 hours

Specifikationer

Specifikationer
Digital övervakning av diagnostik (DDM)
Ja
Duplexsystem
Full
Enkel att installera
Ja
Ethernet LAN
Ja
Fiberkontakt
LC
Formfaktor
SFP+
Förpackningsvikt
30 g
Genomsnittlig tid mellan fel (MTBF)
1000000 h
Hållbarhetscertifikat
CE, Federal Communications Commission (FCC), RoHS
Hot-plug-stöd
Ja
Hot-swap
Ja
Kabelteknik för Ethernet över fiber
10GBASE
Märkeskompatibilitet
Nokia
Max. dataöverföringshastighet
10000 Mbit/s
Max. drifttemperatur
70 °C
Max. överföringsavstånd
300 m
Produktfärg
Silver
Rx-våglängd (max.)
850 nm
SFP-transceiverstandard
SR
Stöd för multimodfiber (MMF)
Ja
Tx-våglängd (max.)
850 nm
Typ av Ethernet-gränssnitt
10 Gigabit Ethernet
Typ av gränssnitt
SFP+
Typ av SFP-transceiver
Fiberoptisk
Uppfyller hållbarhetskrav
Ja
Vikt
0.02 kg

Broschyr

Öppna Broschyr

Dokument

Öppna Dokument

Dokument

Öppna Dokument
Prishistorik för de senaste 6 månaderna
SFP+ transceivermodul BlueOptics 473471A.101-BO 10000 Mbit/s
Aktuell
602,90 kr
Lägsta 7 d
548,96 kr
Högsta 7 d
603,58 kr
Ändring 24 h
-0,68 kr   0%
Ändring 7 d
+53,94 kr   +10%
Ändring 30 d
0,00 kr   0%

Skriv en recension

Betyg *
Obs! HTML-kod tolkas inte!

Fler BLUEOPTICS-produkter i den här kategorin

12

Populära produkter i den här kategorin

8
Säljare: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Org.nr 303192950 · Momsreg.nr LT100008198612 · Skickas från EU (Litauen)
WhatsApp
Messenger
Hej, jag är DistriNodes AI-assistent. Jag hjälper dig gärna att hitta produkter, jämföra alternativ, ta fram offerter som PDF eller skapa supportärenden.
Alla kategorier