Poolrengöringsrobot Wybot C2PRO sladdlös

Wybot C2PRO wireless pool cleaning robot

Wybot C2PRO is a wireless pool robot that combines compact design with high cleaning efficiency. It is equipped with a 4600 mAh battery, which provides up to approximately 3-3.5 hours of operation on a single charge, and a two-layer filtration system with a 180 µm basket. The device supports several cleaning modes and can be operated from a mobile app via Bluetooth, allowing you to conveniently adjust its operation to your current needs. The C2PRO is suitable for pools of various shapes and sizes up to 150 m².

Several cleaning modes to choose from

The Wybot C2PRO offers several operating modes that allow you to select the intensity and scope of cleaning for a specific application. The available options are Eco Mode, Floor, Standard Full Pool, Wall, and Wall Then Floor. This allows the robot to work selectively or comprehensively, effectively cleaning both the bottom and walls.

Intelligent cleaning routes

The robot moves around the pool according to pre-programmed patterns, such as H Pattern, N Pattern, and V Pattern. The use of different routes allows for even coverage of the cleaned surface and reduces the likelihood of missing sections of the bottom or walls.

Full control from the app

The robot is controlled using a button or a mobile app, which allows you to select modes, create schedules, and set work routes, among other things. From your smartphone, you can, for example, start cleaning the bottom, walls, or the entire pool, as well as schedule periodic cleaning.

Two-layer filtration with a 180 µm basket

The two-layer filtration system effectively captures both larger debris and fine particles. A 180 µm filter basket and an ultra-fine filter are responsible for trapping fine sediments, sand, and dirt floating in the water. This design maintains high cleaning efficiency with regular use of the robot.

Long operating time and fast charging

The 4600 mAh battery provides approximately 3-3.5 hours of continuous operation. After completing a cycle, the device can be fully charged in about 2-2.5 hours, allowing for quick preparation for the next cleaning. The wireless design eliminates the problem of tangled cables and increases freedom of use.

Works in a variety of pools

The Wybot C2PRO is designed to work in pools up to 150 m² in size and of various shapes, such as rectangular, round, kidney-shaped, or custom. It can also be used on surfaces made of vinyl, concrete, fiberglass, and other popular pool materials. All this makes it ideal for most situations.

Included

• Robot
• Charger
• Floating elements
• Hook for removing the robot from the water
• User manual
• Quick start guide

How to use

Place the Wybot C2PRO into the pool following the user manual and power the unit on using the onboard button or the mobile app. Select the desired cleaning mode (for example Floor, Wall or Standard Full Pool) and start the cycle. After the cycle completes, retrieve the robot using the included hook or floating elements, remove and rinse the filter basket and filters under running water, then allow them to dry before reinstalling. Charge the robot on its charger until the charge-level indicator shows full before the next long cleaning session.

Recommendations

For best results, run the robot on a regular schedule appropriate to pool use and local conditions, empty and rinse the filter basket after each cycle when heavily soiled, and store the device in a dry, shaded place while charging. Use the Eco mode for light maintenance and the Standard Full Pool mode for comprehensive cleaning. Ensure the pool water chemistry is within recommended ranges to avoid accelerated wear of seals and filters.