Nätverkshanteringskort PowerWalker 10131008

The PowerWalker 10131008 network management card adds IP addressability and a web interface to compatible UPS systems, enabling centralized monitoring and control. Designed for VI 500-1500 R1U UPS models, the card provides Fast Ethernet 10/100 Mbit/s connectivity and supports common management protocols for remote administration across different locations.

Advantages

The card supports HTTPS and SNMPv1/v3 for secure monitoring, Telnet for legacy administration, and IPv6 for modern network compatibility. With Fast Ethernet (10/100BaseT(X)) it integrates into standard wired networks and allows remote programming and controlled shutdown of UPS units. Monitoring multiple UPSs is possible from any internet-connected location, even when devices are on different floors or in separate sites.

Suitable for

• Remote monitoring of UPS systems in server rooms and data centers
• Managing multiple VI 500-1500 R1U UPS units across different floors or sites
• Integration into existing Ethernet-based network management setups

Key specifications

• Brand: PowerWalker
• Model / MPN: 10131008
• Compatible with: VI 500-1500 R1U UPS series
• Network interface: Fast Ethernet 10/100 Mbit/s (10/100BaseT(X))
• Supported protocols: HTTPS, SNMPv1/v3, Telnet
• IP support: IPv6
• Color: Black
• EAN: 4260074980424

How to use

Install the PowerWalker 10131008 into the designated management slot of a compatible VI 500-1500 R1U UPS following the UPS manufacturer’s installation instructions. Connect the card to your network via the Ethernet port and assign an IP address (or enable DHCP). Access the integrated web interface using HTTPS to configure network settings, user accounts, and monitoring parameters; SNMP or Telnet may be used according to your management procedures.

Recommendations

For secure remote management, use HTTPS and SNMPv3 where possible, keep firmware up to date, and restrict network access to management interfaces using VLANs or firewall rules. Verify compatibility with your UPS model before installation.