Nätaggregat Inter-Tech ArgusNT GPS-700 700W

The Inter-Tech ArgusNT GPS-700 is a 700W power supply unit designed for desktop PCs. Certified 80 PLUS Gold (230V EU), it delivers up to 700 W total power with 58 A available on the 12V rail. The unit uses high-quality components and five protective circuits (OPP, SCP, OVP, OCP and NLP) to protect connected hardware and the PSU itself. The GPS-700 features a quiet 140 mm fan with intelligent fan control (IFC) that starts active cooling above 65°C and returns to idle below that temperature. Cabling is non-modular with a 20+4 pin ATX connector and mostly flat ribbon cables for easier routing. The product comes with a 60-month manufacturer warranty.

Advantages

The GPS-700 combines high efficiency and stable output thanks to its 80 PLUS Gold certification and modern internal components, reducing energy loss and heat generation. Integrated protection circuits provide comprehensive safety for the system and the power supply. The 140 mm fan with IFC keeps acoustic noise low by only activating full cooling when required. Flat ribbon cables simplify installation in tight cases and improve airflow compared with bulky round cables.

Suitable for

• Gaming PCs and high-performance desktop systems
• System upgrades or new PC builds requiring a reliable 700W PSU
• Setups that benefit from efficient power delivery and low noise

Key specifications

• Total power: 700 W
• Efficiency: 80 PLUS Gold (up to 93.3%)
• 12V rail current: 58 A
• Motherboard connector: 20+4 pin ATX
• PCIe connectors: 4 × 6+2 pin
• SATA connectors: 6
• Fan: 140 mm with intelligent fan control (IFC)
• Input voltage/frequency: 100–240 V AC, 47–63 Hz
• Weight: 1.97 kg
• Colour: Black
• Manufacturer warranty: 60 months

How to use

Install the GPS-700 into a compatible PC chassis using the standard ATX mounting points. Connect the 20+4 pin ATX cable to the motherboard and attach PCIe 6+2 pin connectors to the graphics card(s) as required. Use the SATA connectors to power drives and other peripherals. Ensure the AC input is connected to a properly rated mains outlet within the 100–240 V range. After power-up the IFC will manage fan operation automatically based on internal temperature; no additional configuration is required.

Recommendations

For stable operation, allow sufficient airflow inside the case and route flat ribbon cables to avoid obstructing fans. Confirm the combined power requirements of your components do not exceed the 700W capacity and keep the PSU firmware/BIOS settings of your system up to date when applicable.