Mina sidor Kontakt
Din varukorg
DPD & FedEx – leveransdatum på produktsidan.
Behöver du hjälp? Fråga DistriNode AI.

MakerBot röd - 650 g - ASA-filament (3D)

MakerBot röd - 650 g - ASA-filament (3D)
MakerBot röd - 650 g - ASA-filament (3D)
1 537,48 kr
PDF
PDF
Lager 1 Produktkod 3392762 Modell 375-0035A Garanti 2 år

Leverans & returer

Beräknad leverans måndag 7 december
Du får löpande uppdateringar via vårt detaljerade spårningssystem
Betalningsalternativ
BetalkortVisaMastercardPayPalApple PayGoogle PayBanköverföring

Produktbeskrivning

With a heat deflection temperature of 93°C and excellent UV stability, this red ASA filament keeps outdoor parts dimensionally accurate under direct sunlight and high ambient heat. A 650 g Smart Spool feeds MakerBot Method and Sketch printers with ±0.02 mm diameter precision for consistent extrusion and clean layer bonding.

Overview

MakerBot ASA (Acrylonitrile Styrene Acrylate) combines the mechanical strength of ABS with superior weather resistance. The filament is engineered for functional prototypes, automotive trim, electrical housings, and any part exposed to moisture, UV radiation, or temperature swings. Its low shrinkage reduces warping on open-frame printers, while the matte red finish hides minor layer lines for a professional look straight off the build plate.

What stands out

  • Excellent UV and weather resistance for long-term outdoor use
  • High impact strength and good chemical resistance
  • Low odor during printing compared to standard ABS
  • Smart Spool with RFID automatically loads material settings on compatible MakerBot printers
  • Low shrinkage and warp for easier printing of large, flat parts

Technical details

  • Material: ASA (Acrylonitrile Styrene Acrylate)
  • Colour: Red
  • Net weight: 650 g
  • Filament diameter: 1.75 mm
  • Diameter tolerance: ±0.02 mm
  • Recommended nozzle temperature: 230–260 °C
  • Recommended build plate temperature: 90–110 °C
  • Heat deflection temperature (0.45 MPa): ~93 °C
  • Tensile strength: ~45 MPa
  • Density: ~1.05 g/cm³
  • Finish: Matte
  • Compatibility: MakerBot Method, MakerBot Sketch

Our verdict

MakerBot ASA in red is a top-tier choice for engineers and makers who need durable, UV-stable parts without the warping and fumes of ABS. The Smart Spool integration and tight diameter tolerance make it a reliable, hassle-free material for both prototyping and end-use applications.

Specifikationer

Specifikationer
Kategori
Filament för 3D-utskrifter
Kompatibla produkter
MakerBot Method, MakerBot Sketch
Märke
MakerBot
Material
ASA
Modell
375-0035A
MPN
375-0035A
Nettovikt
650 g
Produktfärg
Röd
Typ
Filament
Typ av produkt
Filament för 3D-skrivare
Utskriftsfärger
Röd
Vikt
0.65 kg
Prishistorik för de senaste 6 månaderna
MakerBot röd - 650 g - ASA-filament (3D)
Aktuell
1 537,48 kr
Lägsta 7 d
1 506,11 kr
Högsta 7 d
1 537,48 kr
Ändring 24 h
+8,98 kr   +1%
Ändring 7 d
+29,68 kr   +2%
Ändring 30 d
0,00 kr   0%

Skriv en recension

Betyg *
Obs! HTML-kod tolkas inte!

Fler MAKERBOT-produkter i den här kategorin

12

Populära produkter i den här kategorin

8
Säljare: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Org.nr 303192950 · Momsreg.nr LT100008198612 · Skickas från EU (Litauen)
WhatsApp
Messenger
Hej, jag är DistriNodes AI-assistent. Jag hjälper dig gärna att hitta produkter, jämföra alternativ, ta fram offerter som PDF eller skapa supportärenden.
Alla kategorier