Mina sidor Kontakt
Din varukorg
DPD & FedEx – leveransdatum på produktsidan.
Behöver du hjälp? Fråga DistriNode AI.

Ljudkabel Omnitronic 30225207 XLR 0,5 m

Ljudkabel Omnitronic 30225207 XLR 0,5 m
Ljudkabel Omnitronic 30225207 XLR 0,5 m
Ljudkabel Omnitronic 30225207 XLR 0,5 m
Ljudkabel Omnitronic 30225207 XLR 0,5 m
Ljudkabel Omnitronic 30225207 XLR 0,5 m
Ljudkabel Omnitronic 30225207 XLR 0,5 m
225,04 kr
PDF
PDF
Lager 6 Produktkod 2201269 Modell 30225207 Garanti 2 år

Leverans & returer

Beräknad leverans fredag 11 december
Du får löpande uppdateringar via vårt detaljerade spårningssystem
Betalningsalternativ
BetalkortVisaMastercardPayPalApple PayGoogle PayBanköverföring

Ställ en fråga – AI-assistenten svarar direkt.

Produktbeskrivning

The Omnitronic 30225207 XLR 0.5m audio cable is a short splitter cable with a single male XLR (3-pin) connector on one end and two female XLR (3-pin) connectors on the other. Designed for reliable analog audio transmission, this compact black cable enables a single balanced microphone or line-level signal to be routed to two separate XLR inputs without additional active electronics. Its 0.5 m length and lightweight construction suit close-proximity connections on stage, in studio patch bays, or at live sound consoles.

Advantages

This Omnitronic XLR cable provides a balanced signal path that helps reduce interference and maintain audio integrity over short distances. The molded XLR connectors ensure secure, vibration-resistant contacts while the compact design minimizes cable clutter. Its durable black jacket resists wear during regular handling and transport, and the short length reduces signal loss and keeps routing tidy in tight setups.

Suitable for

Key specifications

How to use

Connect the male XLR connector to the output of a microphone, DI box, or other balanced audio source. Plug the two female XLR connectors into the intended inputs on mixers, preamps, or recorders. Verify polarity and phase on the receiving devices and adjust input gain as required. Because this cable passive-splits a signal, avoid using it to combine outputs from two active sources into one input without proper summing or isolation to prevent equipment damage.

Recommendations

Use this short XLR splitter for passive signal distribution over short distances only. For combining multiple outputs or long cable runs, choose dedicated active splitters or distribution amplifiers to maintain signal level and impedance. Store the cable coiled loosely and avoid sharp bends at connector junctions to extend service life.

Höjdpunkter
  • Splitting a microphone or balanced line signal to two XLR inputs
  • Short patch connections on stage and in rehearsal spaces
  • Studio patch bays and console insert or bus routing
  • Temporary live sound setups where space is limited
  • Cable length: 0.5 m
  • Connectors: 1 × XLR male (3-pin) to 2 × XLR female (3-pin)
  • Colour: Black
  • Weight: 0.12 kg
  • Signal type: Balanced analog audio

Specifikationer

Specifikationer
Anslutning 1
XLR (3-polig)
Anslutning 1, kön
Hane
Anslutning 2
2 x XLR (3-stift)
Antal per förpackning
1 pc(s)
Formfaktor anslutning 1
Rak
Formfaktor för anslutning 2
Rak
Förpackningens bredd
180 mm
Förpackningens djup
130 mm
Förpackningshöjd
20 mm
Förpackningsvikt
130 g
Kabellängd
0.5 m
Kontakt 2, kön
Hona
Plug and Play
Ja
Produktfärg
Svart
Vikt
0.12 kg
Prishistorik för de senaste 6 månaderna
Ljudkabel Omnitronic 30225207 XLR 0,5 m
Aktuell
225,04 kr
Lägsta 7 d
223,42 kr
Högsta 7 d
225,10 kr
Ändring 24 h
+0,67 kr   +0%
Ändring 7 d
-0,06 kr   0%
Ändring 30 d
-2,15 kr   -1%

Skriv en recension

Betyg *
Obs! HTML-kod tolkas inte!

Fler OMNITRONIC-produkter i den här kategorin

12

Populära produkter i den här kategorin

8
Säljare: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Org.nr 303192950 · Momsreg.nr LT100008198612 · Skickas från EU (Litauen)
WhatsApp
Messenger
Hej, jag är DistriNodes AI-assistent. Jag hjälper dig gärna att hitta produkter, jämföra alternativ, ta fram offerter som PDF eller skapa supportärenden.
Alla kategorier