Mina sidor Kontakt
Din varukorg
DPD & FedEx – leveransdatum på produktsidan.
Behöver du hjälp? Fråga DistriNode AI.

Kombinationstång Knipex 03 01 180

Kombinationstång Knipex 03 01 180
Kombinationstång Knipex 03 01 180
Kombinationstång Knipex 03 01 180
Kombinationstång Knipex 03 01 180
Kombinationstång Knipex 03 01 180
Kombinationstång Knipex 03 01 180
226,12 kr
PDF
PDF
Lager 2 Produktkod 342587 Modell 1441861 Garanti 2 år

Leverans & returer

Beräknad leverans fredag 4 december
Du får löpande uppdateringar via vårt detaljerade spårningssystem
Betalningsalternativ
BetalkortVisaMastercardPayPalApple PayGoogle PayBanköverföring

Produktbeskrivning

The Knipex 03 01 180 Lineman's pliers are forged from special tool steel and oil-hardened for durability. At 180 mm overall length and weighing 216 g, they combine gripping zones for flat and round materials with long cutting edges suitable for thicker cables. Cutting edges are induction-hardened to approximately 60 HRC to handle both soft and hard wire.

Advantages

These lineman's pliers offer versatile gripping thanks to dedicated zones for flat and round material, and long, hardened cutting edges for reliable cutting of thicker cables. The induction-hardened cutting edges (approx. 60 HRC) extend tool life when working with soft and hard wire. The forged, oil-hardened special tool steel construction provides strength and durability for heavy-duty use.

Suitable for

  • Gripping and bending flat metal parts
  • Holding and shaping round wires and rods
  • Cutting soft and hard electrical wires
  • Cutting thicker cables and conductors
  • General electrical and mechanical maintenance tasks

Key specifications

  • Brand: Knipex
  • Model: 03 01 180
  • Overall length: 180 mm
  • Cutting length: 1.6 cm
  • Weight: 216 g
  • Material: special tool steel, forged, oil-hardened
  • Cutting edge hardness: approx. 60 HRC (induction-hardened)

How to use

Use the gripping zones to secure flat or round material before bending or shaping. Position the long cutting edges around the conductor or wire close to the joint you want to cut, apply steady pressure and close the handles to sever the material. For cutting hard wire, take care to position the wire deep in the hardened cutting edge section to reduce stress on the tool. Keep fingers clear of the cutting area and ensure a firm hold on the handles during use.

Recommendations

Inspect the cutting edges before use and avoid cutting hardened steel beyond the tool's intended capacity. After use, clean off residues and apply a light oil film to prevent corrosion; store the pliers in a dry place.

Höjdpunkter
  • Gripping and bending flat metal parts
  • Holding and shaping round wires and rods
  • Cutting soft and hard electrical wires
  • Cutting thicker cables and conductors
  • General electrical and mechanical maintenance tasks
  • Brand: Knipex
  • Model: 03 01 180
  • Overall length: 180 mm
  • Cutting length: 1.6 cm
  • Weight: 216 g
  • Material: special tool steel, forged, oil-hardened
  • Cutting edge hardness: approx. 60 HRC (induction-hardened)

Specifikationer

Specifikationer
Handtagsfärg
Röd
Handtagsmaterial
Plast
Längd
180 mm
Material
Stål
Skärlängd
16 mm
Typ
Elteknikertång
Vikt
0.216 kg
Prishistorik för de senaste 6 månaderna
Kombinationstång Knipex 03 01 180
Aktuell
226,12 kr
Lägsta 7 d
223,70 kr
Högsta 7 d
226,12 kr
Ändring 24 h
+0,31 kr   +0%
Ändring 7 d
+2,42 kr   +1%
Ändring 30 d
0,00 kr   0%

Skriv en recension

Betyg *
Obs! HTML-kod tolkas inte!

Fler KNIPEX-produkter i den här kategorin

12
Säljare: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Org.nr 303192950 · Momsreg.nr LT100008198612 · Skickas från EU (Litauen)
WhatsApp
Messenger
Hej, jag är DistriNodes AI-assistent. Jag hjälper dig gärna att hitta produkter, jämföra alternativ, ta fram offerter som PDF eller skapa supportärenden.
Alla kategorier