Kombinationsnyckel Gedore 6003500

The Gedore 6003500 combination wrench complies with DIN 3113 Form B, ISO 3318 and ISO 7738 standards. It features a 10° offset ring relative to the shaft, extra-strong ring ends with a thin wall, and is made of Gedore vanadium steel (31CrV3) with chrome plating. Sizes 5 and 5.5 mm use a hexagon ring profile, from size 6 mm upward the ring uses a UD profile. One size is noted as not standardised.

Advantages

The tool combines a box-end ring and an open-end jaw in a single wrench for versatile fastening and loosening tasks. Chrome plating offers corrosion resistance and facilitates cleaning. The 10° offset ring improves access in confined spaces while the thin-wall, extra-strong ring design helps reach closely spaced fasteners without sacrificing strength. Constructed from 31CrV3 vanadium steel for durability and load resistance.

Suitable for

Key specifications

How to use

Select the correct wrench size for the fastener to ensure full contact of the ring and avoid rounding. Place the box end over the nut or bolt head and apply steady force in the required direction; for the open end, seat the jaw fully and pull rather than push where possible to reduce risk of slipping. Use the 10° offset to approach fasteners at an angle when access is limited. Inspect the wrench before use for damage or excessive wear and replace if necessary.

Recommendations

For safe operation, do not use the combination wrench as a hammer or extend the handle with cheater bars. Keep the chrome plating clean and dry to reduce corrosion; occasional light oiling of the steel surface preserves the tool. Follow torque specifications for fasteners to avoid tool or fastener damage.