Mina sidor Kontakt
Din varukorg
DPD & FedEx – leveransdatum på produktsidan.
Behöver du hjälp? Fråga DistriNode AI.

Kabeldelare Axing TZU 40-03

Kabeldelare Axing TZU 40-03
Kabeldelare Axing TZU 40-03
264,15 kr
PDF
PDF
Lager 2 Produktkod 1488967 Modell TZU04003 Garanti 2 år

Leverans & returer

Beräknad leverans tisdag 8 december
Du får löpande uppdateringar via vårt detaljerade spårningssystem
Betalningsalternativ
BetalkortVisaMastercardPayPalApple PayGoogle PayBanköverföring

Ställ en fråga – AI-assistenten svarar direkt.

Produktbeskrivning

The Axing TZU 40-03 is a metallic cable splitter for distribution of RF and RF-modulated IP signals across the 2–2200 MHz frequency range. It includes F and EOC connectors, a high-pass filter, and a fixed tap loss of 4 dB. The compact metal housing (55 × 34 × 18 mm) is suitable for installation in residential and commercial coaxial networks where reliable signal splitting and IP-over-coax feed-in are required.

Advantages

The TZU 40-03 offers sturdy metallic construction for good shielding and durability, a wide frequency range (2–2200 MHz) that supports modern TV and broadband signals, and a defined tap loss of 4 dB for predictable signal levels. An integrated high-pass filter reduces undesired low-frequency interference, and F/EOC connector compatibility allows use with common coax and EoC equipment.

Suitable for

Key specifications

How to use

Install the Axing TZU 40-03 inline with existing coaxial cabling by connecting the input to the feed source and the outputs to downstream coax runs using the F and EOC connectors. Ensure connectors are tightened securely and observe proper grounding practices. The unit’s high-pass filter and 4 dB tap loss are fixed; no user adjustments are required. Position the splitter in a dry, ventilated location and avoid mechanical strain on connector cables.

Recommendations

The splitter should be used within the specified 2–2200 MHz range and with compatible F/EOC equipment. When integrating RF-modulated IP signals, verify that connected devices support Ethernet over Coax standards and check signal levels after installation to confirm acceptable reception. For long cable runs or multiple splits, consider the cumulative attenuation and, if necessary, use amplification or adjust the network layout.
Höjdpunkter
  • Splitting coaxial RF signals in home and small commercial installations
  • Feeding RF-modulated IP (Ethernet over Coax) signals into a coax network
  • Use in TV distribution, cable TV, and broadband coax systems
  • Frequency range: 2–2200 MHz
  • Tap loss: 4 dB
  • Connectors: F and EOC
  • High-pass filter: built-in
  • Housing material: metal
  • Dimensions (W × D × H): 55 × 34 × 18 mm
  • Brand: Axing — Model: TZU 40-03 (MPN: TZU04003)

Specifikationer

Specifikationer
Anslutning(ar)
F, EOC
Antal
50
Antal anslutningar
3
Bredd
55 mm
Djup
34 mm
Enkel att installera
Ja
Frekvensområde
2 - 2200
Höjd
18 mm
Produktfärg
Metallic
Skärmningsklass
A
Typ
Kabelsplitter

Broschyr

Öppna Broschyr
Prishistorik för de senaste 6 månaderna
Kabeldelare Axing TZU 40-03
Aktuell
264,15 kr
Lägsta 7 d
258,19 kr
Högsta 7 d
264,15 kr
Ändring 24 h
0,00 kr   0%
Ändring 7 d
+5,26 kr   +2%
Ändring 30 d
+32,96 kr   +14%

Skriv en recension

Betyg *
Obs! HTML-kod tolkas inte!

Fler AXING-produkter i den här kategorin

12

Populära produkter i den här kategorin

2
Säljare: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Org.nr 303192950 · Momsreg.nr LT100008198612 · Skickas från EU (Litauen)
WhatsApp
Messenger
Hej, jag är DistriNodes AI-assistent. Jag hjälper dig gärna att hitta produkter, jämföra alternativ, ta fram offerter som PDF eller skapa supportärenden.
Alla kategorier