Mina sidor Kontakt
Din varukorg
DPD & FedEx – leveransdatum på produktsidan.
Behöver du hjälp? Fråga DistriNode AI.

Jordfelsbrytare CNC NV821877 2-polig 16A 30mA

Jordfelsbrytare CNC NV821877 2-polig 16A 30mA
Jordfelsbrytare CNC NV821877 2-polig 16A 30mA
271,19 kr
PDF
PDF
Lager 5 Produktkod 2181656 Modell NV821877 Garanti 2 år

Leverans & returer

Beräknad leverans onsdag 25 november
Du får löpande uppdateringar via vårt detaljerade spårningssystem
Betalningsalternativ
BetalkortVisaMastercardPayPalApple PayGoogle PayBanköverföring

Ställ en fråga – AI-assistenten svarar direkt.

Produktbeskrivning

Residual current circuit breaker with overcurrent protection (RCBO), 2 poles, rated current 16 A and residual sensitivity 30 mA. The CNC NV821877 combines residual-current detection and overcurrent protection in a single modular device for DIN-rail installation in residential and light-commercial electrical panels. It is designed to disconnect supply quickly in case of earth leakage or overload/short-circuit, helping to reduce electric shock and fire risk.

Advantages

The RCBO integrates both residual-current and short-circuit/overload protection, saving space in the distribution board and simplifying wiring. It features a clear contact position indicator (red = closed, green = open), an anti-mistake contact terminal block, and a flame-retardant housing with high temperature and impact resistance. The device supports top-side connection and accepts cable or pin-type busbar up to 35 mm².

Suitable for

  • Residential electrical distribution boards
  • Small commercial installations
  • Protecting circuits with basic earth-leakage and overcurrent protection requirements
  • DIN-rail (35 mm) modular assemblies

Key specifications

  • Type: RCBO, 2 poles
  • Rated current: 16 A
  • Tripping characteristic: Class C
  • Residual sensitivity: 30 mA
  • Rated voltage: AC 230 V
  • Rated short-circuit capacity (Icn): 6000 A
  • Rated impulse withstand voltage (Uimp): 4000 V
  • Insulation voltage (Ui): 500 V
  • Frequency: 50/60 Hz
  • Break time: ≤ 0.1 s
  • Mechanical life: 10000 cycles; Electrical life: 4000 cycles
  • Protection degree: IP20
  • Connection: from top; cable or pin-type busbar; up to 35 mm²
  • Mounting: DIN rail EN 60715 (35 mm)
  • Operating temperature: -25 °C to +70 °C
  • Dimensions: 82 × 36 × 78 mm
  • Standards: IEC 61009-1 / EN 61009-1
  • Warranty: 24 months

How to use

Install the CNC NV821877 on a 35 mm DIN rail in the distribution board and secure electrical connections from the top according to wiring diagrams and local regulations. Use appropriate conductors or pin-type busbars up to 35 mm². Ensure the device is connected to the correct phase and neutral poles and that the earth conductor is present in the installation. After wiring, test the device using the built-in test function or a suitable RCD tester to confirm correct operation.

Recommendations

Use this RCBO in circuits where combined residual-current and overcurrent protection is required; perform periodic testing (monthly recommended) and follow national electrical codes for installation, testing, and maintenance.
Höjdpunkter
  • Residential electrical distribution boards
  • Small commercial installations
  • Protecting circuits with basic earth-leakage and overcurrent protection requirements
  • DIN-rail (35 mm) modular assemblies
  • Type: RCBO, 2 poles
  • Rated current: 16 A
  • Tripping characteristic: Class C
  • Residual sensitivity: 30 mA
  • Rated voltage: AC 230 V
  • Rated short-circuit capacity (Icn): 6000 A
  • Rated impulse withstand voltage (Uimp): 4000 V
  • Insulation voltage (Ui): 500 V
  • Frequency: 50/60 Hz
  • Break time: ≤ 0.1 s
  • Mechanical life: 10000 cycles; Electrical life: 4000 cycles
  • Protection degree: IP20
  • Connection: from top; cable or pin-type busbar; up to 35 mm²
  • Mounting: DIN rail EN 60715 (35 mm)
  • Operating temperature: -25 °C to +70 °C
  • Dimensions: 82 × 36 × 78 mm
  • Standards: IEC 61009-1 / EN 61009-1
  • Warranty: 24 months

Specifikationer

Specifikationer
Antal poler
2
Brytförmåga
6 kA
Drifttemperatur (T-T)
-25 - 70 °C
Garantitid
24 månader
Ingångsfrekvens
50/60 Hz
International Protection (IP)-kod
IP20
Märkspänning
230 V AC
Märkström
16 A
Typ av automatsäkring
RCBO
Typ av installation
DIN-skena
Typ av produkt
RCBO (residual current breaker with overcurrent protection)
Prishistorik för de senaste 6 månaderna
Jordfelsbrytare CNC NV821877 2-polig 16A 30mA
Aktuell
271,19 kr
Lägsta 7 d
268,29 kr
Högsta 7 d
271,19 kr
Ändring 24 h
+0,37 kr   +0%
Ändring 7 d
+2,90 kr   +1%
Ändring 30 d
0,00 kr   0%

Skriv en recension

Betyg *
Obs! HTML-kod tolkas inte!

Samma serie och alternativ

9

Populära produkter i den här kategorin

7
Säljare: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Org.nr 303192950 · Momsreg.nr LT100008198612 · Skickas från EU (Litauen)
WhatsApp
Messenger
Hej, jag är DistriNodes AI-assistent. Jag hjälper dig gärna att hitta produkter, jämföra alternativ, ta fram offerter som PDF eller skapa supportärenden.
Alla kategorier