Cooler Dynatron Argus T-200 processor 8 cm svart orange

The Dynatron Argus T-200 is an 8 cm processor cooler designed for compact and mid-size PC builds. With a fan speed range of 600–1800 RPM, it provides controlled airflow of up to 30.58 m³/h and a maximum air pressure of 1.15 mmH2O. The cooler measures 94 mm x 34 mm x 94 mm and weighs 0.175 kg, making it suitable for systems with limited space. The unit features a black and orange colour scheme that combines functional cooling with a visually distinct appearance.

Advantages

The Dynatron Argus T-200 offers a balance of cooling performance and compact dimensions suitable for small form-factor and standard tower cases. Its variable fan speed allows reduced noise at low loads and higher airflow when the processor requires additional cooling. The cooler supports a range of Intel sockets, enabling compatibility with many mainstream desktop processors. Lightweight construction and a modest thermal design power rating make installation and thermal management straightforward for everyday computing tasks.

Suitable for

• Compact desktop builds and HTPCs where space is limited
• Mainstream Intel-based systems using supported LGA sockets
• Office workstations and home PCs with moderate cooling requirements
• Systems where a clear visual accent in black and orange is desired

Key specifications

• Type: Air CPU cooler with 80 mm fan
• Fan diameter: 80 mm
• Fan speed: 600–1800 RPM
• Airflow: 30.58 m³/h
• Maximum air pressure: 1.15 mmH2O
• Dimensions: 94 mm x 34 mm x 94 mm
• Weight: 0.175 kg
• Thermal Design Power (TDP): 85 W
• Colour: Black and orange
• Supported processor sockets: multiple LGA Intel sockets

How to use

Install the Dynatron Argus T-200 according to the motherboard and cooler manufacturer instructions: power off the system, remove any existing cooler, apply the recommended thermal interface material to the CPU heatspreader, position the cooler over the socket and secure it using the provided mounting hardware. Connect the fan cable to the motherboard fan header and configure fan control in BIOS or via software to match desired noise and cooling behaviour. Verify clearance for nearby components such as RAM modules and case panels before completing assembly.

Recommendations

For reliable performance, ensure the cooler is mounted firmly and that thermal paste is applied in a thin, even layer. Use motherboard fan control to create a fan curve that keeps idle noise low while allowing increased fan speed under load. Maintain adequate case airflow and periodically clean the fan and heatsink surfaces to prevent dust buildup and sustain cooling efficiency.