Mina sidor Kontakt
Din varukorg
DPD & FedEx – leveransdatum på produktsidan.
Behöver du hjälp? Fråga DistriNode AI.

InLine buntbandsfästen 40×40 mm svarta, 10 st

InLine buntbandsfästen 40×40 mm svarta, 10 st
InLine buntbandsfästen 40×40 mm svarta, 10 st
85,32 kr
PDF
PDF
Lager 200 Produktkod 1487737 Modell 59965J Garanti 2 år

Leverans & returer

Beräknad leverans måndag 7 december
Du får löpande uppdateringar via vårt detaljerade spårningssystem
Betalningsalternativ
BetalkortVisaMastercardPayPalApple PayGoogle PayBanköverföring

Ställ en fråga – AI-assistenten svarar direkt.

Produktbeskrivning

Adhesive cable tie mounts InLine 40×40 mm black, pack of 10 are self-adhesive mounting bases designed to secure cable ties to flat surfaces without drilling. Each 40×40 mm mount provides a stable anchor point for organizing and routing cables in cabinets, behind equipment, on walls or other smooth substrates. The black finish blends with darker installations and is compatible with standard cable ties up to 10 mm wide.

Advantages

These adhesive mounts allow fast, tool-free attachment of cable ties, reducing installation time and avoiding surface damage from screws or anchors. Their compact square design offers reliable hold while minimizing visual impact. The strong pressure-sensitive adhesive backing ensures firm adhesion to clean, smooth surfaces; the mounts are suitable for use in confined spaces and where temporary or permanent cable fixing is required.

Suitable for

Key specifications

How to use

Clean the surface thoroughly to remove dust, oil and moisture before application. Peel off the protective film from the adhesive backing and press the mount firmly onto the flat surface for several seconds to ensure contact. Allow adhesive to set according to ambient temperature and avoid stressing the bond immediately. Thread a cable tie through the mount slot and secure cables, trimming the tie to the desired length.

Recommendations

For best adhesion, apply mounts to smooth, non-porous surfaces such as painted metal, plastics or finished wood at temperatures above 10°C. Avoid application to rough, dirty, wet or low-energy surfaces (e.g., some polyethylenes). For heavier cable bundles or critical installations, supplement adhesive mounts with mechanical fasteners or choose mounts placed at shorter intervals to distribute load.

Höjdpunkter
  • Wire and cable management inside server cabinets and electrical enclosures
  • Routing cables behind AV equipment, monitors and appliances
  • Securing looms and harnesses along walls and panels
  • Temporary or permanent fixing of cables in office and industrial environments
  • Mount dimensions: 40 × 40 mm
  • Color: black
  • Pack quantity: 10 pieces
  • Compatible cable tie width: up to 10 mm
  • Adhesive type: pressure-sensitive self-adhesive backing suitable for smooth surfaces
  • Shape: square mounting base

Specifikationer

Specifikationer
Antal per förpackning
10 pc(s)
Bredd
40 mm
Djup
40 mm
Drifttemperatur (T-T)
-20 - 85 °C
Förpackningens bredd
120 mm
Förpackningens djup
205 mm
Förpackningshöjd
25 mm
Förpackningsvikt
55 g
Paketvolym
600 cm³
Produktfärg
Svart
Vikt
40 g

Broschyr

Öppna Broschyr
Prishistorik för de senaste 6 månaderna
InLine buntbandsfästen 40×40 mm svarta, 10 st
Aktuell
85,32 kr
Lägsta 7 d
83,62 kr
Högsta 7 d
85,32 kr
Ändring 24 h
0,00 kr   0%
Ändring 7 d
+1,60 kr   +2%
Ändring 30 d
0,00 kr   0%

Skriv en recension

Betyg *
Obs! HTML-kod tolkas inte!

Fler INLINE-produkter i den här kategorin

8

Populära produkter i den här kategorin

1
Säljare: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Org.nr 303192950 · Momsreg.nr LT100008198612 · Skickas från EU (Litauen)
WhatsApp
Messenger
Hej, jag är DistriNodes AI-assistent. Jag hjälper dig gärna att hitta produkter, jämföra alternativ, ta fram offerter som PDF eller skapa supportärenden.
Alla kategorier