Mina sidor Kontakt
Din varukorg
DPD & FedEx – leveransdatum på produktsidan.
Behöver du hjälp? Fråga DistriNode AI.

Halvmask med luftrening 3M 6502QLPRO — halvmask, blå/grå, snabbspänne

Halvmask med luftrening 3M 6502QLPRO — halvmask, blå/grå, snabbspänne
Halvmask med luftrening 3M 6502QLPRO — halvmask, blå/grå, snabbspänne
Halvmask med luftrening 3M 6502QLPRO — halvmask, blå/grå, snabbspänne
Halvmask med luftrening 3M 6502QLPRO — halvmask, blå/grå, snabbspänne
907,36 kr
PDF
PDF
Lager 100 Produktkod 2528542 Modell 7100330131 Garanti 2 år

Leverans & returer

Beräknad leverans måndag 7 december
Du får löpande uppdateringar via vårt detaljerade spårningssystem
Betalningsalternativ
BetalkortVisaMastercardPayPalApple PayGoogle PayBanköverföring

Ställ en fråga – AI-assistenten svarar direkt.

Produktbeskrivning

The 3M 6502QLPRO half facepiece air-purifying respirator is a reusable respirator designed to protect the wearer from airborne particulates and certain gases or vapours when used with the appropriate filters. The kit includes a medium-sized quick-latch half-face body in blue/grey, combined A2 chemical cartridges and P3 particulate filters, and filter retainers. The respirator is intended for tasks such as spray painting, brush and roller painting, sanding, and work with pesticides and weedkillers.

Advantages

The respirator provides combined A2 protection against some organic gases and vapours (for example solvent-based paints, adhesives and cleaning agents) together with P3 particulate protection offering up to 99% filtration efficiency for fine dust and mists at medium concentrations. A 3M bayonet connection enables secure and straightforward cartridge and filter changes. The quick-latch mechanism allows the mask to be dropped down from the face without removing the head straps, while the silicone face seal is resilient for a comfortable, stable fit. The Cool Flow exhalation valve helps reduce heat and moisture build-up inside the mask.

Suitable for

When it may not be suitable

This half-face respirator is not suitable for atmospheres that are immediately dangerous to life or health (IDLH) or where oxygen levels are below safe limits. It is also not intended for protection against all chemical hazards; suitability depends on selecting the correct A2 and P3 filters for the specific contaminants and their concentrations.

Key specifications

How to use

Select the appropriate A2 and P3 filters for the contaminants and expected concentrations. Fit the respirator to the face and adjust head straps to achieve a snug, comfortable seal; perform a user seal check before each use. Attach cartridges and filters using the 3M bayonet connection until they click into place. During use, the quick-latch mechanism allows the wearer to lower the mask from the face temporarily without removing the head harness. Replace filters and cartridges according to manufacturer guidance and when you detect increased breathing resistance, damage, or contamination.

What to consider before purchase

Recommendations

Use this reusable half-face respirator with the specified A2 chemical cartridges and P3 particulate filters for tasks like painting, sanding and applying pesticides. Always perform a fit check, follow local safety guidance, and replace filters when breathing resistance increases or according to the filter manufacturer’s instructions.
Höjdpunkter
  • Spray painting and using solvent-based paints
  • Brush and roller painting
  • Sanding and surface preparation
  • Applying pesticides, herbicides and similar chemicals
  • General maintenance and light industrial tasks requiring particle and vapour protection
  • Facepiece type: reusable half-face respirator (medium size included in kit)
  • Filter protection: combined A2 organic vapour cartridges and P3 particulate filters (pair included)
  • Filtration efficiency: P3 particulate filtration up to 99% for fine dust and mist at medium concentrations
  • Connection: 3M bayonet quick-connect for cartridges and filters
  • Material: silicone face seal for comfort and stability
  • Exhalation valve: Cool Flow™ valve to reduce heat and moisture
  • Included in kit: half-face body, A2 filters (pair), P3 filters (pair), filter retainers (pair)
  • Standards: complies with relevant European standards for half-mask and filter protection
  • Confirm the contaminants and concentrations you will encounter to ensure A2 and P3 filters are appropriate
  • Ensure a medium-sized facepiece fits your facial dimensions or select the correct size if different
  • Check compatibility with other face or eye PPE and any workplace respirator program requirements
  • Understand filter replacement intervals and maintenance needs for reusable respirators

Specifikationer

Specifikationer
Produktfärg
Blå, grå
Typ
Luftrenande andningsskydd
Utförande
Halvmask

Broschyr

Öppna Broschyr
Prishistorik för de senaste 6 månaderna
Halvmask med luftrening 3M 6502QLPRO — halvmask, blå/grå, snabbspänne
Aktuell
907,36 kr
Lägsta 7 d
884,27 kr
Högsta 7 d
907,36 kr
Ändring 24 h
+5,30 kr   +1%
Ändring 7 d
+22,10 kr   +2%
Ändring 30 d
0,00 kr   0%

Skriv en recension

Betyg *
Obs! HTML-kod tolkas inte!

Fler 3M-produkter i den här kategorin

12
Säljare: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Org.nr 303192950 · Momsreg.nr LT100008198612 · Skickas från EU (Litauen)
WhatsApp
Messenger
Hej, jag är DistriNodes AI-assistent. Jag hjälper dig gärna att hitta produkter, jämföra alternativ, ta fram offerter som PDF eller skapa supportärenden.
Alla kategorier