Mina sidor Kontakt
Din varukorg
DPD & FedEx – leveransdatum på produktsidan.
Behöver du hjälp? Fråga DistriNode AI.

ESUN PLA Basic 1,75 mm beige 3D-skrivarfilament, 1 kg

ESUN PLA Basic 1,75 mm beige 3D-skrivarfilament, 1 kg
ESUN PLA Basic 1,75 mm beige 3D-skrivarfilament, 1 kg
198,74 kr
PDF
PDF
Lager 40 Produktkod 3362328 Modell PLA-Basic175O-BG1P1 Garanti 2 år

Leverans & returer

Beräknad leverans onsdag 25 november
Du får löpande uppdateringar via vårt detaljerade spårningssystem
Betalningsalternativ
BetalkortVisaMastercardPayPalApple PayGoogle PayBanköverföring

Produktbeskrivning

Warping, poor layer adhesion, and brittle prints are common frustrations in 3D printing, often caused by low-quality filament. The ESUN PLA Basic filament in beige solves these issues with enhanced toughness and reliable performance, making it an excellent choice for both beginners and experienced makers.

Who is it for

This filament is ideal for hobbyists, educators, and professionals who need consistent, easy-to-print PLA for prototypes, decorative items, and functional parts. Its low warping and good layer adhesion make it suitable for a wide range of FDM 3D printers.

Main features

  • Enhanced toughness and impact resistance for durable prints
  • Good layer adhesion and reduced warping for reliable results
  • Consistent diameter of 1.75 mm with tight tolerance of ±0.03 mm
  • Compatible with most FDM 3D printers
  • 1 kg net weight on a sturdy plastic spool

Specifications

  • Material: PLA+ (Polylactic Acid Plus)
  • Filament diameter: 1.75 mm
  • Diameter tolerance: ±0.03 mm
  • Colour: Beige
  • Net filament weight: 1 kg
  • Spool material: Plastic
  • Printing temperature: 205-225 °C
  • Heated bed temperature: 25-70 °C (optional)
  • Recommended print speed: 40-100 mm/s
  • Density: 1.24 g/cm³
  • Tensile strength: 30-52 MPa
  • Elongation at break: 5-10%
  • Melt flow index: 5-10 g/10min (210°C, 2.16kg)
  • Spool outer diameter: 200 mm
  • Spool width: 64 mm
  • Spool hub hole diameter: 56 mm
  • Storage: Cool, dry place, away from direct sunlight

Tips

For best results, store the filament in a sealed container with desiccant when not in use. Start with a nozzle temperature of 210°C and adjust within the recommended range based on your printer. A heated bed is not required, but if used, set it to 50°C for improved adhesion.

Specifikationer

Specifikationer
Antal
1
Antal per förpackning
1
Bruttobredd (mm)
200
Bruttodjup (mm)
200
Bruttohöjd (mm)
64
EAN
6922572216358
Egenvikt (kg)
0.2
Inbyggt laddbart batteri
Nej
Kategori
Filament för 3D-skrivare
Märke
ESUN
Material
PLA+
Modell
PLA-Basic175O-BG1P1
MPN
PLA-Basic175O-BG1P1
Nettovikt
1 kg
Plast (ej PET)
Nej
Produktfärg
Beige
Storlek
Diameter: 1,75 mm, spole: 200 x 64 mm
Tillverkare
ESUN
Tillverkarens produktnamn
PLA Basic 1.75mm Beige 1kg
Typ
Filament
Typ av produkt
Filament för 3D-skrivare
Utskriftsfärger
Beige
WEEE-avgift
Nej
Prishistorik för de senaste 6 månaderna
ESUN PLA Basic 1,75 mm beige 3D-skrivarfilament, 1 kg
Aktuell
198,74 kr
Lägsta 7 d
196,66 kr
Högsta 7 d
198,74 kr
Ändring 24 h
0,00 kr   0%
Ändring 7 d
-157,71 kr   -44%
Ändring 30 d
-157,71 kr   -44%

Skriv en recension

Betyg *
Obs! HTML-kod tolkas inte!

Samma serie och alternativ

8

Populära produkter i den här kategorin

8
Säljare: UAB KUR LT · Gariūnų g. 57-17, LT-02300 Vilnius, Litauen · Org.nr 303192950 · Momsreg.nr LT100008198612 · Skickas från EU (Litauen)
WhatsApp
Messenger
Hej, jag är DistriNodes AI-assistent. Jag hjälper dig gärna att hitta produkter, jämföra alternativ, ta fram offerter som PDF eller skapa supportärenden.
Alla kategorier