Mina sidor Kontakt
Din varukorg
DPD & FedEx – leveransdatum på produktsidan.
Behöver du hjälp? Fråga DistriNode AI.

Konstruktionsvinkelbeslag DMX KP1 90 x 90/65 mm, 2,5 mm tjockt

Konstruktionsvinkelbeslag DMX KP1 90 x 90/65 mm, 2,5 mm tjockt
Konstruktionsvinkelbeslag DMX KP1 90 x 90/65 mm, 2,5 mm tjockt
27,31 kr
PDF
PDF
Lager 41 Produktkod 4661101 Modell 5907708140210 Garanti 2 år

Leverans & returer

Beräknad leverans tisdag 1 december
Du får löpande uppdateringar via vårt detaljerade spårningssystem
Betalningsalternativ
BetalkortVisaMastercardPayPalApple PayGoogle PayBanköverföring

Produktbeskrivning

The DMX KP1 is a structural angle bracket made of cold-rolled steel sheet with a zinc coating on both sides, with an arm length of 90 mm, a strip width of 65 mm and a material thickness of 2.5 mm.

  • Arm length: 90 mm
  • Strip width: 65 mm
  • Material thickness: 2.5 mm
  • Material: cold-rolled steel sheet with a zinc coating on both sides, at least 275 g/m2 and about 20 µm thick

The zinc layer is usually covered with a thin oil film that protects it from oxidation.

After cutting, the sides of the product have no zinc layer, which does not affect the corrosion protection of the whole product.

  • Shear load capacity: 17.8 kN
  • Weight: 0.208 kg

Specifikationer

Specifikationer
Bredd
65 mm
Kategori
Vinkelbeslag
Märke
DMX
Material
Stål
Vikt
0.208 kg
Prishistorik för de senaste 6 månaderna
Konstruktionsvinkelbeslag DMX KP1 90 x 90/65 mm, 2,5 mm tjockt
Aktuell
27,31 kr
Lägsta 7 d
27,30 kr
Högsta 7 d
27,31 kr
Ändring 24 h
+0,01 kr   +0%
Ändring 7 d
—   
Ändring 30 d
—   

Skriv en recension

Betyg *
Obs! HTML-kod tolkas inte!

Fler DOMAX-produkter i den här kategorin

9
Säljare: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Org.nr 303192950 · Momsreg.nr LT100008198612 · Skickas från EU (Litauen)
WhatsApp
Messenger
Hej, jag är DistriNodes AI-assistent. Jag hjälper dig gärna att hitta produkter, jämföra alternativ, ta fram offerter som PDF eller skapa supportärenden.
Alla kategorier