Mina sidor Kontakt
Din varukorg
DPD & FedEx – leveransdatum på produktsidan.
Behöver du hjälp? Fråga DistriNode AI.

3D-skrivarmunstycke Flashforge Creator 4 0,6 mm

3D-skrivarmunstycke Flashforge Creator 4 0,6 mm
3D-skrivarmunstycke Flashforge Creator 4 0,6 mm
225,19 kr
PDF
PDF

Leverans & returer

Beräknad leverans torsdag 10 december
Du får löpande uppdateringar via vårt detaljerade spårningssystem
Betalningsalternativ
BetalkortVisaMastercardPayPalApple PayGoogle PayBanköverföring

Produktbeskrivning

Nozzle for Flashforge Creator 4 0.6mm is a replacement extrusion tip designed for the Flashforge Creator 4 series. With a 0.6 mm orifice diameter, it provides controlled filament flow suited to mid-to-large layer widths and faster print speeds. This nozzle is intended for users who need to change layer height and extrusion volume without altering hardware beyond the hotend assembly, and for routine maintenance or nozzle swaps on compatible Creator 4 machines.

Advantages

The 0.6 mm nozzle increases extrusion volume per pass compared to smaller orifices, enabling faster prints and stronger layer bonding at larger layer heights. It maintains consistent filament flow for common thermoplastics and supports a balance between surface quality and print time. As a compatible replacement for the Creator 4 series, it simplifies maintenance tasks and reduces downtime when a nozzle change is required.

Suitable for

  • Faster prototyping with mid-to-large layer heights
  • Parts requiring increased material deposition and improved interlayer strength
  • General-purpose prints where print time is prioritized over very fine detail
  • Routine nozzle replacement and printer maintenance

Key specifications

  • Nozzle diameter: 0.6 mm
  • Compatible printers: Flashforge Creator 4 series
  • Material compatibility: standard thermoplastics (PLA, ABS, PETG and similar) when used within recommended temperature ranges
  • Use case: mid-to-large layer widths and increased extrusion volume
  • Mount type: compatible with Creator 4 hotend assembly

How to use

Turn off and cool the printer before attempting nozzle replacement. Remove the existing nozzle according to the Creator 4 maintenance instructions, then install the 0.6 mm nozzle, ensuring proper seating and threading into the hotend. After installation, heat the hotend to the appropriate printing temperature for the filament in use and perform a manual extrusion or calibration print to confirm correct flow and extrusion multiplier settings. Adjust slicer layer height and print speed to match the larger nozzle diameter for optimal results.

Recommendations

For best performance, increase layer height and extrusion width settings in your slicer when using the 0.6 mm nozzle; typical layer heights range from 0.2 mm up to 0.4–0.45 mm depending on desired surface finish. Use appropriate print temperatures and slower cooling for materials prone to warping. Regular cleaning and inspection of the nozzle tip help maintain consistent extrusion.

Höjdpunkter
  • Faster prototyping with mid-to-large layer heights
  • Parts requiring increased material deposition and improved interlayer strength
  • General-purpose prints where print time is prioritized over very fine detail
  • Routine nozzle replacement and printer maintenance
  • Nozzle diameter: 0.6 mm
  • Compatible printers: Flashforge Creator 4 series
  • Material compatibility: standard thermoplastics (PLA, ABS, PETG and similar) when used within recommended temperature ranges
  • Use case: mid-to-large layer widths and increased extrusion volume
  • Mount type: compatible with Creator 4 hotend assembly

Specifikationer

Specifikationer
Kompatibilitet
Creator 4
Munstycksbredd
0.6 mm
Prishistorik för de senaste 6 månaderna
3D-skrivarmunstycke Flashforge Creator 4 0,6 mm
Aktuell
225,19 kr
Lägsta 7 d
220,05 kr
Högsta 7 d
396,35 kr
Ändring 24 h
+1,32 kr   +1%
Ändring 7 d
-171,16 kr   -43%
Ändring 30 d
-181,96 kr   -45%

Skriv en recension

Betyg *
Obs! HTML-kod tolkas inte!

Fler FLASHFORGE-produkter i den här kategorin

12

Populära produkter i den här kategorin

8
Säljare: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Org.nr 303192950 · Momsreg.nr LT100008198612 · Skickas från EU (Litauen)
WhatsApp
Messenger
Hej, jag är DistriNodes AI-assistent. Jag hjälper dig gärna att hitta produkter, jämföra alternativ, ta fram offerter som PDF eller skapa supportärenden.
Alla kategorier